(9-19mm) Damaged Nut Bolt Remover Stud Extractor Locking Socket 11pcs Kit

I had a stripped fill plug on an auto gearbox, right up in the transmission tunnel. Didn't really want to drop the box just to check the level.... No other removal tools could fit in the space. These worked perfectly and the job took 5 minutes (after three or four two-hour sessions trying every other method know to mankind.....!) Very good!

The transaxle sump plug on my 6x4 John Deere Gator was frozen and rounded off by the last owner, the only access is though a small opening underneath see pic so not enough room for a socket but these bolt removers are only 13mm deep so would fit over the bolt and then used a 19mm ring spanner to remove with my trusty club hammer much faster than removing the transaxle and these are a great price would recommend

Bought this as I had a rounded off bolt on my Beelte Torsion Bar cover plate. (14mm) and guessed it was worth a go before trying to use a welder on it. If I'm honest didn't think it would work and was amazed to find the bolt undoing and easily winding out. Did soak the bolt in WD40 for a week or so, and hammered the extractor onto the bolt head good and hard. Then wound the Bolt out using an oversized socket on a breaker bar.Worked perfectly and unwound the bolt without problems. Absolutely will recommend as much easier than welding a nut on the bolt head, or trying to use grips in a tight area.

On my cars previous oil change I didn't buy a new washer for the sump plug so I made do with the old one and tightened the bolt way beyond its torque limit to stop the oil dripping. (Don't ever do this)Come this years oil change I had rounded the bolt on my car sump plug. Tried to shift it with a big pair of mole grips fixed as tight as I could but it just destroyed the bolt even further.So I bought the bolt extractors, tapped it on with a hammer very gingerly, didn't want to crack the aluminium sump. Used a long bar and it freed it no problem. I was suppressed how well it worked considering how mangled the bolt was.The only downside was that I had to spend another £12 on a 25mm socket, because guess what! It was the only socket that was missing from my kit. Such is life.

Solid looking and feel. Only used it once so can't really appreciate it fully although it done the trick the first time I used it.

Used this product to try and remove a rounded bolt from a brake caliper. Ended up flattening the cutting edge during this process.But I contacted the manufacturer who were very apologetic and sent me out a replacement. So the customer service is excellent and the product will work for general rounded bolts/nuts, but heavy duty rusted-in bolts might be to big a job for it.

I had oopsed and had rounded off my sump plug on the motorbike...D'oh!I tried everything I could to remove it, I used vice-grips, I tried a hammer and chisel, i even cut into the head to try and use a screwdriver.But the plug was an alloy and the sump was aluminium so i wasn't going to use too much force without catastrophic consequences...So, I went online and ordered this set.I received it well within delivery time.I took out the 12mm socket, tapped it onto the plug with light hammer tap.Applied the spanner and carefully applied pressure...the plug gave way with little fuss.Saved me a lot of money in the end (labour costs are £60 per hour at my bike shop...doubt that they would only charge me 15mins worth!) and I have the whole set in my toolbox for the next time!!!

Ok