PCIe 4.0 GPU Mount Bracket with ARGB LED Module, Multi-Angle Adjustment with Riser Cable, Compatible to RTX4090, 4080, 4070ti- Black

My cas doesn't have a lot of room and I was able to fit this (offset since I have a solid back) with my 4070 and a fan under it. The magnets are strong enough to hold the bracket with my GPU and is holding the fan down, too. Looks great, has aura sync with armory crate. Install was a bit difficult. Each leg has 2 screws on the side so I had to pull it out, adjust the feet, put it back in, and do it all again when it didn't fit right. Took about an hour and a half to get the feet at the right angle, everything to fit, and the connector in the right position. Overall a great product and I recommend it. The magnets are a great idea, I could have mounted my GPU on the back, bottom, under my motherboard if there was room, front, on the side panel if it was metal, etc.

I’m giving it one star bc of one very important and precise component this creates with no end to fix. THE HOLDER ITSELF IS AWESOME, just wanted to make that clear. But what you need to know is that their riser cable is junk and it created nonstop crashes, uncontrollable instability. And I realized this the moment I replaced it with my stock one I got with my Y70 Hyte Case, and what ya know computer works amazing. Just the cable is not white 😑. But I’ll take a stable working PC over that when I can hide it by just making the GPU sit higher lol

It does exactly what it says it's going to do..you can put your giant video card at an angle. I did it with the 7900 XTX. That part is fine, except then I had to route the DP cable into my case through a PCI opening and have it sit completely inside the case. If you want to not do that, or if you can't because your case doesn't have the depth, then you'll have to cut the PCI slots open and have a huge opening.

Pretty straight forward and easy to setup. Looks great!!!

Do you want to see the fans on your Video card cause you dont trust the fan monitoring software. This is your Answer. Seriously its a simple mount with an LED strip. Its a little pricy but worth it if you like that kinda feature. Has no other functional purpose. Only gave it one star less because there is no way to hold it down other than magnets on the base. Magnets on the base are strong on my case but I still dont trust em and used zip ties to hold it down. Probably could drill holes for custom screw mounts if you want. I did order 6" DP and HDMI and made custom brackets so i dont have to open my case to disconnect the video or drag wires around when I need to move it. That part always annoyed me about these vertical mounts. When I have it straight vertical I just was using my GPU Stand and the case's vertical mounting slots if it has it and the extended PCIe cables. This is all in one and you have to mount via the magnets to the bottom of case and run cables through the slots if you dont.

Well build and sturdy. While I didn't use the 4.0 cable that came with it, I did use another cable from the same company and it works just fine. I did have to modify my bracket to work for my needs, but this would work as is in a normal PC build just fine.

Garbage the area for the pcie cable pcie mount does not allow the backplate to lock in. Also the mounting hole dnt allow the cable riser to screw in sending it back probably runind my card fumbling trying to get it all lined up Cheap bracket to allow for lean back of card doesn't secure screws don't fit

This product is amazing it is was easy to install and looks awesome I recommend this to anyone who has limited space in their cpu case.

I bought this on Black Friday sale 2023. And man what a disappointment for the money I wasted on this. Even on “ special” this thing is way over priced. Cheaply made bracketing system and the rubber on the magnetic feet are already peeling away, that hide the magnets under them. I’ve attached photos, so you can see. Legit this is not worth the $72 I bought it on sale for, let alone its full price. At most this thing should be $30. Utter cheap garbage! Aside from that it does what it says, and holds the GPU in multiple positions and horizontally.. but if you have a big graphics card .. it’s a mission it fix into place. I don’t recommend this cheap manufactured garbage that is overpriced 100 times ! But do what you will with your money.. I Cbf’d returning it .. but I would, if I was ! 😂

EZDIY - FAB has done it again. They have made a very good looking and solid GPU bracket for PC customization. The materials used are heavy gauge steel that has been cut, stamped, and powder coated to a high-quality. The RGB lights are removable from the bracket. If you wish to modify or need to change, they are held in place with four Phillips screws. They are using 3 pin 5 V RGB connecters and the cable supplied has male and female attachments to easily daisychain to other components. The angle brackets are magnetic and stick to the computer case basement, and once adjusted the included set screws to lock it in place. The PC, i.e. 4.0 riser cable is white silicone cabling that matches the bracket extremely well, the rise is 7 inches. There is adjustability with the mounting position of PCI bracket in the mount and is secured with included screws. There are cable management clips on the back of the mount which is pretty handy. this is a very sturdy mount. The description in the listing is accurate and because it comes with a PCIGEN four riser cable for this price point it is good value. This is Very easy to use, looks great and will add colour and style to any custom computer build. Five stars.

La descripción del producto no miente se adapta y sirve al 100

台なので置いたときの安定感があるのと、斜めにすることで壁から距離が空くのがいい。 おかげで前まで縦置きするとケースの蓋ギリギリにあるせいでなかなか冷えなかったグラボが冷えるようになった。

Se debe quedar abierto donde conectas el cable del monitor, lo que se deja expuesto para que entre mas polvo